Debian/IPC Installation

Gelöste Themen / Solved Threads
irys09
IPC Neuling
Beiträge: 16
Registriert: Fr 13. Jul 2012, 18:32
Kontaktdaten:

Debian/IPC Installation

Beitrag von irys09 »

hi
habe gerade die debian 7.4.0 minimal iso mit usb stick auf igel thin client installiert(software auswählen alles abgewählt).
Dann IPC installiert ohne probleme aber jetzt wenn ich die IP des server aufrufe kommt sowas:

Spoiler
Show

Code: Alles auswählen

Debian Logo Apache2 Debian Default Page
It works!

This is the default welcome page used to test the correct operation of the Apache2 server after installation on Debian systems. If you can read this page, it means that the Apache HTTP server installed at this site is working properly. You should replace this file (located at /var/www/html/index.html) before continuing to operate your HTTP server.

If you are a normal user of this web site and don't know what this page is about, this probably means that the site is currently unavailable due to maintenance. If the problem persists, please contact the site's administrator.
Configuration Overview

Debian's Apache2 default configuration is different from the upstream default configuration, and split into several files optimized for interaction with Debian tools. The configuration system is fully documented in /usr/share/doc/apache2/README.Debian.gz. Refer to this for the full documentation. Documentation for the web server itself can be found by accessing the manual if the apache2-doc package was installed on this server.

The configuration layout for an Apache2 web server installation on Debian systems is as follows:

/etc/apache2/
|-- apache2.conf
|       `--  ports.conf
|-- mods-enabled
|       |-- *.load
|       `-- *.conf
|-- conf-enabled
|       `-- *.conf
|-- sites-enabled
|       `-- *.conf
          

    apache2.conf is the main configuration file. It puts the pieces together by including all remaining configuration files when starting up the web server.
    ports.conf is always included from the main configuration file. It is used to determine the listening ports for incoming connections, and this file can be customized anytime.
    Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/ directories contain particular configuration snippets which manage modules, global configuration fragments, or virtual host configurations, respectively.
    They are activated by symlinking available configuration files from their respective *-available/ counterparts. These should be managed by using our helpers a2enmod, a2dismod, a2ensite, a2dissite, and a2enconf, a2disconf . See their respective man pages for detailed information.
    The binary is called apache2. Due to the use of environment variables, in the default configuration, apache2 needs to be started/stopped with /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not work with the default configuration.

Document Roots

By default, Debian does not allow access through the web browser to any file apart of those located in /var/www, public_html directories (when enabled) and /usr/share (for web applications). If your site is using a web document root located elsewhere (such as in /srv) you may need to whitelist your document root directory in /etc/apache2/apache2.conf.

The default Debian document root is /var/www/html. You can make your own virtual hosts under /var/www. This is different to previous releases which provides better security out of the box.
Reporting Problems

Please use the reportbug tool to report bugs in the Apache2 package with Debian. However, check existing bug reports before reporting a new bug.

Please report bugs specific to modules (such as PHP and others) to respective packages, not to the web server itself.
Benutzeravatar
jensebub
IPC Meister
Beiträge: 1133
Registriert: So 1. Mai 2011, 09:34
Been thanked: 1 time
Kontaktdaten:

Re: Debian/IPC Installation

Beitrag von jensebub »

Hallo,
entferne mal die apache defaultpage, dann sollte alles funktionieren.

Code: Alles auswählen

rm /var/www/index.html 
Gruß
jensebub

Gesendet von meinem GT-I8190 mit Tapatalk
irys09
IPC Neuling
Beiträge: 16
Registriert: Fr 13. Jul 2012, 18:32
Kontaktdaten:

Re: Debian/IPC Installation

Beitrag von irys09 »

Nee hat nix geholfen aber danke.
Blöd nur das ich die Webif somit nicht aufrufen kann
Benutzeravatar
jensebub
IPC Meister
Beiträge: 1133
Registriert: So 1. Mai 2011, 09:34
Been thanked: 1 time
Kontaktdaten:

Re: Debian/IPC Installation

Beitrag von jensebub »

Es sollte schon aufrufbar sein, sonst wäre bei bei der install eteas schoef gelaufen...
Was passiert denn beim Aufruf http://ipdesservrrs/ipc

Gruß
jensebub

Gesendet von meinem GT-I8190 mit Tapatalk
irys09
IPC Neuling
Beiträge: 16
Registriert: Fr 13. Jul 2012, 18:32
Kontaktdaten:

Re: Debian/IPC Installation

Beitrag von irys09 »

Dann kommt sowas.

Code: Alles auswählen

Not Found

The requested URL /ipc was not found on this server
Also oscam läuft,habe alles andere mit ftp und putty eingerichtet nur webif geht nicht komisch.
Habe IPC schon auf meinem Igel Thin Client am laufen gehabt ohne Probleme und WebIF hat funktioniert,jetzt habe ich nur statt CF eine 30GB Festplatte drin,daran kanns aber nicht liegen!!!
laut Beschreibung CF möglich, HDD wird empfohlen
,dann Debian 7.4.0 32 Bit minimal Netzinstall von Usb Stick installiert
laut Beschreibung Softwareauswahl: NICHTS-alle abwählen!
und dann ganz normal IPC installiert mit wget und bash.
Hat IPC script villeicht irgendwas nicht installiert?
Glaube ich nicht weil:
++ TIP! Mittlerweile kann auch das IPC-Setupscript die Installation sämtlicher Pakete übernehmen!
Zuletzt geändert von jensebub am Fr 7. Mär 2014, 15:52, insgesamt 1-mal geändert.
Grund: quote ist nicht gleich code ;) bitte die richtigen Forumsoptionen benutzen, da bedeutung unterschiedlich,...
Benutzeravatar
jensebub
IPC Meister
Beiträge: 1133
Registriert: So 1. Mai 2011, 09:34
Been thanked: 1 time
Kontaktdaten:

Re: Debian/IPC Installation

Beitrag von jensebub »

Das kannst nur du beurteilen,...ob es Fehlermeldungen bei der Install gab?!
OScam ist eigenständig, auch der http-server von OScam ist eigenständig, deshalb kann man nicht wirklich Rückschlüsse auf die einwandfreie Install von IPC liefern!

Am besten einfach nochmal das installskript laufen lassen, und auf Fehlermeldungen achten.

Gruß
jensebub
irys09
IPC Neuling
Beiträge: 16
Registriert: Fr 13. Jul 2012, 18:32
Kontaktdaten:

Re: Debian/IPC Installation

Beitrag von irys09 »

soll ich IPC erstmal deinstallieren oder nur i update ausführen?
Benutzeravatar
jensebub
IPC Meister
Beiträge: 1133
Registriert: So 1. Mai 2011, 09:34
Been thanked: 1 time
Kontaktdaten:

Re: Debian/IPC Installation

Beitrag von jensebub »

Ein i update könnte schon abhilfe schaffen ;) würd ich erstmal probieren, ist schneller ;)

Gruß
irys09
IPC Neuling
Beiträge: 16
Registriert: Fr 13. Jul 2012, 18:32
Kontaktdaten:

Re: Debian/IPC Installation

Beitrag von irys09 »

So habe ich gemacht gerade und keine fehler gesehen,lief alles glatt hmmmmm
Benutzeravatar
jensebub
IPC Meister
Beiträge: 1133
Registriert: So 1. Mai 2011, 09:34
Been thanked: 1 time
Kontaktdaten:

Re: Debian/IPC Installation

Beitrag von jensebub »

Funktioniert denn nun das IPC-webif?
Antworten

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast